Mercury Vapor Analyzer Rental Department
Mercury Instruments USA now offers a wide range of (MVA) mercury vapor analyzer rental units. If you need to rent a mercury vapor analyzer or mercury detector for a day, for a week or for a month, we can provide you with the right detector.
We currently offer for rent the following Mercury Vapor Detectors and Analyzers:
-
Rent the VM 3000
continuous mercury monitoring analyzer
-
Rent the Arizona Instruments Jerome 431X
-
Rent the Arizona Instruments Jerome 411
Rent the Mercury Tracker 3000 portable mercury vapor analyzer
Mercury Tracker 3000 Rental
Rent a true continuous, portable, real time mercury
analyzer with the built in pump and sampling probe, this
mercury vapor detector gives you the ability to scan large areas and pin point
the highest Hg concentrations.
Unlike the gold sensor detectors this mercury detector technology does not become easily saturated with mercury and the Tracker 3000 will not require you to constantly re-calibrate, sending the detector back to the factory every time you actually detect a high level of mercury or require you to leave a contaminated area to re-generate the detector.
The Tracker 3000 detector can obtain a true auto zero base line for continued sampling in the midst of the highest mercury concentration, giving you the ability to accurately see where the mercury is, not just giving you snap shot of “yes we got mercury” or not.
- Rent a True continuous mercury detector
- Dismountable probe
- Integrated battery for 6 hours operation
- Shock proof
- 3 mercury measuring ranges 0-100 / 0-1000 / 0-2000 µg/m³
- 0-10; 0-100; 0-200 ppb
- High resolution 0.0001 mg/m3 - .1ug/m3
- Data logger integrated
- No need for constant calibration
- The Tracker 3000 uses atomic absorption technology, the same technology that is used for metal analysis in the most state of the art laboratories across the globe. We have packaged this technology in a very easy to use, rugged instrument.
Mercury Tracker 3000 Technical Specifications
- Measuring Principal: Atomic Absorption Spectrometry (AAS)
- Wavelength: 253.7 nm
- UV Source: electrodeless low-pressure mercury lamp (EDL)
- Stabilization Method: reference detector and thermal control
- Measuring Ranges:
- 0.1 .1 to 100 µg/m³ (0-10 ppb)
0 to 1000 µg/m³ (0-100 ppb)
0 to 2000 µg/m³ (0-200 ppb) - Sensitivity: 0.1 µg/m³ (0.01 ppb)
- Response Time (99% signal): < 1 second (no measuring cycles or regeneration required)
- Computation of mean values: automatically, three freely selectable averaging intervals
- Alarm: Optical and Acoustical, 3 levels programmable
- Status Alarms: measuring cell soiled, battery state (option - UV source exhausted)
- Control Pad: Waterproof membrane keypad
- Measurement Display: 5.3"graphical LC display with background illumination
- Signal Outputs: 4...20 mA; RS 232 for PC or printer
- Software for data transfer to PC: export to EXCEL
- Pump: Membrane pump, approx 1.5 L/min
- Batteries: rechargeable NiMH batteries (6 hour capacity) quick swap battery options
- additional power supply: 110...240 V/(50/60 Hz) with included power supply; external 12 V DC sources like car batteries
- Dimensions: 17.7 " wide x 7" High x 12" deep
- Weight: 12 lbs. with batteries
- Sample Filter: 1 um porosity, 45 mm (1.8") diameter, disposable
Click click here to download brochure
VM 3000 Mercury Vapor Monitor
Rental
-
Continuous
Operation and Real Time Reading - Sensitive detection method: UV absorption
- Auto Zero
- Three Measuring Ranges: .1-100/ 0-1000/ 0-2000 ug/m3
- .01-10 ppb; 0-100 ppb, 0-200 ppb
- Heated optical cell avoids condensation
- Integrated data logger (optional)
- Integrated battery for mobile use (optional)
The VM-3000 Mercury Vapor Monitor measures the mercury concentration in gases continuously. It is used in the laboratory or can be installed at places where mercury has to be monitored. Industry people use the VM 3000 Mercury Sniffer as well as university researchers or safety people. It is a great tool for plenty of different applications: work place monitoring, exhaust air monitoring, emissions monitoring in the chemical industry, ground air screening of contaminated areas, quality control of hydrogen and other gases, detector for laboratory applications.
VM-3000 Mercury Vapor Monitor Technical Specifications
- Measuring Principal: UV-Absorption
- Wavelength: 253.7 nm
- UV Source: electrodeless low-pressure mercury lamp
- Stabilization Method: reference beam and thermal
- Measuring Ranges:
0.1 .1 to 100 µg/m³ (0-10 ppb)
0 to 1000 µg/m³ (0-100 ppb)
0 to 2000 µg/m³ (0-200 ppb) - Sensitivity: 0.1 µg/m³ (0.01 ppb)
- Computation of mean value: automated via three freely selectable time intervals
- Response Time (99% signal): < 1 second (no measuring cycles or regeneration required)
- Alarm: 3 levels programmable
- Pump: Membrane pump, approx 2 L/min optional flow meter with alarm message
- Filter: PTFE, 1u, 47-50 mm diameter
- Power Supply: 230 V / 50/60 Hz (110... 120V / 50/60 Hz optional)
- Status Alarms: measuring cell soiled, battery state (option - UV source exhausted)
- Measurement Display: graphical LC display with background illumination
- Signal Outputs: 4...20 mA; RS 232 for PC or printer
- Battery Options: external 12 DC source; optional 12 V batteries integrated, ca. 5h capacity
- Power Consumption: 40W
- Weight: 15 Lbs
- Dimensions: 17.7 " wide x 5.9" High x 13.7" deep
Check out our New Tracker 3000IP portable mercury vapor monitor
Click here to download brochure
Jerome 431X Hand Held Mercury Analyzer Rental
Rent the Jerome 431X Analyzer, it accurately measures mercury in the sensitivity range of 0.003 to 0.999 mg/m3 Hg. Uses a gold film sensor which is selective to mercury, 13 second response time. Operates up to 6 hours on a full charge. Digital display in either mg/m3 or ng. Includes: Instrument, manual, 110 power cord
- Analysis of mercury vapor in 13 seconds
- Rugged and easy to operate
- Rechargeable internal battery pack for portability
- Automatic backlight for LCD during low light conditions
- Microprocessor ensures a linear response throughout the entire range of the sensor
- Survey mode for rapid source detection of mercury vapor concentrations
- Wide detection range allows multiple applications
- Pressure sensitive membrane switch operation
- Gold film sensor selective to mercury
- Rechargeable NiCd battery pack
- Internal sample pump
- Liquid Crystal Display
- Lightweight handheld design
- Operating temperature 32 to 10°4F
- Runtime 6 hours, charges in 14
- Sample flow rate 750 mL/min
- Dimensions 13" x 6" x 4"
- Weight 7 lbs.
- Ranges Mercury Vapor 0.003 to 0.999 mg/m³
- Resolution 0.001 mg/m³
- Accuracy5% @ 0.100 mg/m³
- Response Time13 sec. (Sample mode) 4 sec. (Survey mode)
Jerome 411 Hand Held Mercury Analyzer Rental
- Rent a Gold film sensor selective to mercury
- Rechargeable NiCd battery pack
- No datalogging
- Internal sample pump
- Liquid Crystal Display
- Lightweight handheld design
- Operating temperature 32 to 104°F
- Runtime 5 hours, charges in 14
- Sample flow rate 750 mL/min
- Dimensions 13" x 6" x 4"
- Weight 5 lbs.
- Ranges Mercury Vapor 0.000 to 1.999 mg/m³ Hg
- Resolution 0.003 mg/m³ Hg
- Accuracy 5% @ 0.107 mg/m³ Hg
- Response Time 10 sec. (Sample mode) 1 sec. (Survey mode)
To Receive a Mercury Vapor Monitor Rental Price Quotation
-
In the box below, please highlight the instrument that you are interested in renting
-
Please fill out the comment box with any additional questions
-
Complete the company information form
-
Click Submit
You will receive a price quotation for the selected instrument within 24 hours.
Feel free to check the phone call request box if you would like to receive a phone call from one of our client representatives.
For special rental applications please contact Alex Hummell at Alex@test4mercury.com or please call him at (303) 972-3740 ext. 4